简体中文|English

Honesty,Innovation,Win-win,Grow up

Your current location:Home > Product information > Epoxy resin using guide

News
company culture
Product information

Epoxy resin using guide

1. Introduction
Epoxy resin and hardener curing procedure is a two parts polymerization reaction,two parts mixing ration should be moderate. Due to its high viscosity and weak intermiscibility,when mixing together ,weight should be correctly and stir gently but thoroughly .
 
2.   Process
a.      preparation
Before mixing ,please check the weight machine work normally .(e.g. electronic weight machine should make sure enough electrocity). Cleaning mixing cup ,stiring pole ,and spoon.Checking the liquid surface ,make sure no layer difference .(e.g. part A contains color powder which is easy to get stratification,pls stir for 2-3 mins) and no mechanical impurities .
b.      Weight
According to using quanlity.pick up part A and B ,put it in the cup separately ,each part weighting deviation should not exceed 2%(e.g. weight 50g, 49.0~51.0g permission deviation.)
c.       Stiring
Use stiring pole to stir for 3~5 mins in same direction .,in each stiring minute ,pls wipe the liquid on the wall and make sure the bottom liquid stir up throughtly .
d.      Tidy
Pls tidy mixing cup ,pole etc in time .
 
[Return]

Copyright ©2014 Guangzhou Pochely New Material Technology co.,LTD    Address: No.12,Xiantang Road ,Yonghe Economic Zone ,Luogang District ,Guangzhou City
Guangdong ICP: 05053188    Website construction: heyou51

close